ELECTRONICS

• A guide to the controls of your FormulaSPEED
• Getting a "beacon" with AiM GPS
• Gear calculation procedure
• Fly-by-wire Auto Calibration Procedure:
  A. With car on, hold full throttle and cycle master switch.
  B. After 15 seconds at full throttle, release pedal and wait for ECU to restart

Your FormulaSPEED2.0 is delivered with the following DATA Acquisition Package

AiM EVO4 w/ Formula Steering Wheel display, 8MB, 5-CH Includes GPS antenna, DL cable, CAN/RS232 Harness, RPM cable.

With the base system you are able to monitor these car functions after each session: Oil pres, Oil temp, H2O temp, RPM, Speed, Gear, Shift lights, Alarms, Lap times, ECU information, Track map & Throttle position.

Series Permitted Options:
Steering sensor kit
Single wheel speed to allow for gear calculation
Brake pressure MSI 0-2000psi pressure transducer, 1/8" NPT (legal to run 2)
Wide Angle SmartyCam sync’d with EVO4 data stream imprinted on video

Reviewing data requires AiM's Race Studio 2 Software which is available as a free download at the Aim website: http://www.aim-sportline.com

Other important AiM Documentation:


• EVO User's Manual
• EVO4 Pinout
• Formula Steering Wheel User's Manual
• Formula Steering Wheel Pinout
• SmartyCam User's Manual

The car also features a Cosworth CD4 ECU that feeds all of its information into the AiM system through a dedicated CAN feed. The CD4 is a sealed unit that requires no servicing.

Other important electronics information:

• Wiring harness details (.xls file with multiple sheets) revised 12.21.2015
• ECU Offload Tool (zip file, right click and save before opening - PC only)
• Pi Toolbox Software(zip file, right click and save before opening - PC only)